-
- offline
- Site Admin
- Репутация: 0
- Сообщения: 13
- Зарегистрирован: Сб сен 29, 2012 10:52 am
Solvent купить теплоизоляцию для труб отопления Waterborne Coatings & Cast Elastomers
K-FLEX XM-337 SB 220 55,000 -20°C Provides increased toughness
and chemical resistance for solvent based and high solids systems. TDS Sample
K-FLEX 171-90 SB 122 3,700 -30°C
A chain extended version of K-FLEX 188. Offering longer pot life, improved adhesion and flexibility. Low crosslinker demand. TDS Sample
K-FLEX 188 SB, WB, CAST 230 10,000 -32°C
Improves flexibility while maintaining hardness. Also improves salt spray, humidity resistance and exterior durability. Highly recommended for 2k urethane applications. TDS Sample
K-FLEX XM-359 SB, WB, CAST 230 9,800 -32°C Prevents yellowing interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. TDS Sample
K-FLEX 148
SB 235 3,750 -42°C
Improves flexibility and gloss. Increase solids at lower viscosity. Good flow and leveling. Excellent intercoat adhesion properties. Recommended for primers.
TDS Sample
K-FLEX XM-366 SB, WB 265 2,000 -45°C
Newest polyester diol. Excellent flexibility, gloss and hardness. TDS Sample
K-FLEX A307
SB, WB 140 5,400 -50°C
A chain extended version of
K-FLEX A308. Flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. Lower crosslinker demand.
TDS Sample
K-FLEX A308
SB, WB, CAST 260 1,500 -59°C
Similar to 188. Low viscosity and high hydroxyl number gives good hardness and adhesion and lowers VOCs.
TDS Sample
K-FLEX XM-332
SB, CAST 265 400 -68°C Lowest viscosity for lowest VOC. Softest films. TDS Sample
K-FLEX XM-3307
SB 300 8,000
NA
Pigment wetting resin for solvent based systems. TDS Sample
Urethane Diols
Product System Type Hydroxyl # as Supplied Acid # Viscosity 25°C (cPs) Attributes TDS Sample
Solventborne & Waterborne Systems
K-FLEX UD-320-100
SB, WB, Solventless
350 <1 7,000 @ 50°C Prepolymer synthesis. For water or solvent. Preparation of polyester polyurethanes or alkyd polyurethanes. TDS Sample
K-FLEX UD-320 SB 300 <1 9,000 Increases application solids and hardness. Improves chemical resistance, exterior durability and hydrolytic stability. TDS Sample
K-FLEX UD-350W WB 325 <1 4,000 Enhanced version of UD-320W for improved storage stability.
UD-320W is still available. TDS Sample
K-FLEX XM-386 SB, WB 390 - 45,000 All primary hydroxyl groups. Excellent low temperature cure response. Good moisture resistance. TDS Sample
2K Epoxy Modifiers
Product System Type Active Hydrogen
as Supplied Viscosity 25°C
(cPs) Attributes TDS Sample
Solventborne & Solventless Systems
K-FLEX 7301 SB, SL
125
150
Excellent adhesion and improved corrosion resistance. Excellent compatibility with acrylic, polyester, epoxy resins. Faster low temperature cure
in 2K epoxy/amine and reduced blushing in 2K epoxy/polyamide
TDS Sample
K-FLEX XM-B301 SB 190 1,100
Primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.
K-FLEX XM-337 SB 220 55,000 -20°C Provides increased toughness
and chemical resistance for solvent based and high solids systems. TDS Sample
K-FLEX 171-90 SB 122 3,700 -30°C
A chain extended version of K-FLEX 188. Offering longer pot life, improved adhesion and flexibility. Low crosslinker demand. TDS Sample
K-FLEX 188 SB, WB, CAST 230 10,000 -32°C
Improves flexibility while maintaining hardness. Also improves salt spray, humidity resistance and exterior durability. Highly recommended for 2k urethane applications. TDS Sample
K-FLEX XM-359 SB, WB, CAST 230 9,800 -32°C Prevents yellowing interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. TDS Sample
K-FLEX 148
SB 235 3,750 -42°C
Improves flexibility and gloss. Increase solids at lower viscosity. Good flow and leveling. Excellent intercoat adhesion properties. Recommended for primers.
TDS Sample
K-FLEX XM-366 SB, WB 265 2,000 -45°C
Newest polyester diol. Excellent flexibility, gloss and hardness. TDS Sample
K-FLEX A307
SB, WB 140 5,400 -50°C
A chain extended version of
K-FLEX A308. Flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. Lower crosslinker demand.
TDS Sample
K-FLEX A308
SB, WB, CAST 260 1,500 -59°C
Similar to 188. Low viscosity and high hydroxyl number gives good hardness and adhesion and lowers VOCs.
TDS Sample
K-FLEX XM-332
SB, CAST 265 400 -68°C Lowest viscosity for lowest VOC. Softest films. TDS Sample
K-FLEX XM-3307
SB 300 8,000
NA
Pigment wetting resin for solvent based systems. TDS Sample
Urethane Diols
Product System Type Hydroxyl # as Supplied Acid # Viscosity 25°C (cPs) Attributes TDS Sample
Solventborne & Waterborne Systems
K-FLEX UD-320-100
SB, WB, Solventless
350 <1 7,000 @ 50°C Prepolymer synthesis. For water or solvent. Preparation of polyester polyurethanes or alkyd polyurethanes. TDS Sample
K-FLEX UD-320 SB 300 <1 9,000 Increases application solids and hardness. Improves chemical resistance, exterior durability and hydrolytic stability. TDS Sample
K-FLEX UD-350W WB 325 <1 4,000 Enhanced version of UD-320W for improved storage stability.
UD-320W is still available. TDS Sample
K-FLEX XM-386 SB, WB 390 - 45,000 All primary hydroxyl groups. Excellent low temperature cure response. Good moisture resistance. TDS Sample
2K Epoxy Modifiers
Product System Type Active Hydrogen
as Supplied Viscosity 25°C
(cPs) Attributes TDS Sample
Solventborne & Solventless Systems
K-FLEX 7301 SB, SL
125
150
Excellent adhesion and improved corrosion resistance. Excellent compatibility with acrylic, polyester, epoxy resins. Faster low temperature cure
in 2K epoxy/amine and reduced blushing in 2K epoxy/polyamide
TDS Sample
K-FLEX XM-B301 SB 190 1,100
Primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.